4개의 M12 PoE+ 포트, DIO, CAN Bus, RAID 및 EN50155를 갖춘 인텔 6세대 스카이레이크 코어 i7 차내 팬리스 임베디드 컴퓨터
- Supports Intel® 6th-Gen Core™ i7/i5/i3 LGA1151 CPU
- 4x 802.3at Gigabit PoE+ ports via M12 connectors
- On-board CAN bus for in-vehicle communication
- 4-CH isolated DI and 4-CH isolated DO
- 2x SATA ports for two 2.5″ SATA HDD/SSD, with one hot-swappable HDD tray, supporting RAID 0/1
- 4x full-size mini-PCIe sockets with SIM support
- 8~35V wide-range DC input with built-in ignition control
- EN 50155 certificate (EN 50121-3-2 / EN50121-2-1 / EN50121-2-2 / EN61373)
Overview
Introduction
Nuvo-5100VTC는 EN50155 인증서를 준수하는 최첨단 차내 팬리스 임베디드 컨트롤러입니다. 인텔 6세대 코어 CPU를 장착한 이 제품은 다양한 차내 애플리케이션을 위해 탁월한 CPU 및 GPU 성능을 자랑합니다.
Nuvo-5100VTC는 연결된 장치에 25W 전원을 공급하기 위해 4개의 PoE+ 포트를 제공합니다. 충격/진동 환경에서 견고한 연결을 보장하는 M12, x 코드 커넥터를 사용하여 구현됩니다. 데이터 통신을 위해 RJ-45에 의한 기가비트 이더넷 포트를 2개 더 사용 가능합니다. 또한 3G/4G/WIFI 통신에 대응하는 모듈을 장착한 내부 미니 PCIe 소켓을 4개 활용할 수 있습니다.
게다가 Nuvo-5100VTC는 차내 CAN Bus 시스템, 개별적인 ECU 또는 다른 자동차 장치와 함께 통신을 위한 CAN Bus를 통합시킵니다. 또한 센서/액츄에이터 컨트롤, 점화 전원 컨트롤 및 이중 드라이브 RAID 스토리지를 위한 격리된 DIO가 있어, Nuvo-5100VTC는 심플하게 차내 애플리케이션이 요구하는 모든 것들을 만족시킬수 있는 컨트롤러를 만듭니다.
Nuvo-5100VTC is a state-of-the-art in-vehicle fanless embedded controlloer in compliant with EN50155 certificate. Featuring Intel® 6th-Gen Core™ CPU, it exhibits superb CPU and GPU performance for various in-vehicle applications.
Nuvo-5100VTC offers four 802.3at PoE+ ports to supply 25W power to the connected device. They are implemented using M12, x-coded connectors, which guarantee extremely rugged connectivities in shocking/vibrating environments. Two more Gigabit Ethernet ports by RJ-45 are available for data communication. You can also utilize four internal mini-PCIe sockets with corresponding modules for 3G/4G/WIFI communication.
In addition, Nuvo-5100VTC integrates CAN bus for communicating with in-vehicle CAN bus system, individual ECUs or other automotive devices. There is also an isolated DIO for sensor/ actuator control, ignition power control and dual-drive RAID storage which makes Nuvo-5100VTC simply the controller that can satisfy all your in-vehicle application needs.
Specification
| System Core | |
|---|---|
| Processor | Supports Intel® Core™ i7/i5/i3 LGA1151 CPU -Core™ i7-6700TE(8M Cache, 2.4/3.4 GHz, 35W TDP) -Core™ i5-6500TE(6M Cache, 2.3/3.3 GHz, 35W TDP) -Core™ i3-6100TE(4M Cache, 2.7 GHz, 35W TDP) |
| Chipset | Intel® Q170 Platform Controller Hub |
| Graphics | Integrated Intel® HD Graphics 530 |
| Memory | Up to 32 GB DDR4-2133 SDRAM by two SODIMM sockets |
| AMT | Supports AMT 11.0 |
| TPM | Supports TPM 2.0 |
| I/O Interface | |
|---|---|
| Ethernet | 2x Gigabit Ethernet ports by Intel® I219 and I210 |
| PoE+ | 4x IEEE 802.3at (25.5W) Gigabit PoE+ ports by Intel® I210, M12 x-coded connector |
| CAN | 1x CAN 2.0 port |
| Isolated DIO | 4x isolated DI and 4x isolated DO |
| USB | 4x USB 3.0 ports via native XHCI controller 4x USB 2.0 ports |
| Video Port | 1x stacked VGA + DVI-D connector 2x DisplayPort connectors, supporting 4K2K resolution |
| Serial Port | 2x software-programmable RS-232/422/485 port (COM1 & COM2) 1x RS-232 port (COM3) |
| Audio | 1x Mic-in and 1x Speaker-out |
| Storage Interface | |
|---|---|
| SATA HDD | 1x hot-swappable HDD tray for 2.5” HDD/SSD installation 1x Internal SATA port for 2.5” HDD/SSD installation, supporting RAID 0/1 |
| mSATA | 1x full-size mSATA port (mux with mini-PCIe) |
| Expansion Bus | |
|---|---|
| Mini PCI-E | 1x full-size mini-PCIe socket with panel-accessible SIM socket 1x full-size mini-PCIe socket with internal SIM socket (mux. with mSATA) 2x full-size mini-PCIe sockets (USB signals only) with internal SIM sockets |
| Power Supply | |
|---|---|
| DC Input | 1x 3-pin pluggable terminal block for 8~35VDC DC input |
| Remote Ctrl. & Status Output |
1x 10-pin (2×5) wafer connector for remote on/off control and status LED output |
| Mechanical | |
|---|---|
| Dimension | 240 mm (W) x 225 mm (D) x 79 mm (H) |
| Weight | 3.3 Kg |
| Mounting | Neousys’ patented damping bracket (standard) or optional DIN-Rail mounting |
| Environmental | |
|---|---|
| Operating Temperature | -40°C ~ 70°C */** |
| Storage Temperature | -40°C ~ 85°C |
| Humidity | 10%~90% , non-condensing |
| Vibration | Operating, 5 Grms, 5-500 Hz, 3 Axes (w/ SSD, according to IEC60068-2-64) |
| Shock | Operating, 50 Grms, Half-sine 11 ms Duration (w/ SSD, according to IEC60068-2-27) |
| EMC | CE/FCC Class A, according to EN 55022 & EN 55024 |
| Certification | EN50155 TX Class |
* The CPU loading is applied using Passmark® BurnInTest 8.0. For detail testing criteria, please contact Neousys Technology.
**For sub-zero operating temperature, a wide temperature HDD drive or Solid State Disk (SSD) is required.