2x IEEE 802.3at PoE+ 포트가 장착된 인텔 Atom Bay Trail 차세대 산업용 PC 팬리스 임베디드 컴퓨터

  • Intel® Atom™ Bay Trail E3845 quad-core processor
  • Dual mPCIe and USIM sockets for 3G, LTE, WLAN, BT or GPS modules
  • Dual storage with 1x mSATA and 1x SATA
  • Intelligent ignition power control
  • 1x CAN bus port with compliance to CAN bus 2.0A and CAN 2.0B
  • 8 to 35VDC wide-range DC input
  • Operating temperature from -25° to 70°C
  • Patented damping bracket for in-vehicle installation(R.O.C Patent No.M491752)
  • E-Mark certificate (E13 No. 10R-0513905)



Nuvo-2510VTC는 Intel Atom E3845 쿼드코어 프로세서를 장착한 차세대 산업용 PC 팬리스 임베디드 컴퓨터입니다.

2개의 IEEE 802.3at 기가비트 이더넷 포트를 갖춘 Nuvo-2510VTC는 단일 표준 CAT-5e로 된 25W GigE 및 PoE IP 카메라를 직접 운전할 수 있습니다. 지능형 점화 전원 컨트롤 및 내장 CAN 버스와 함께 Nuvo-2510VTC는 모바일 NVR 및 모바일 APNR과 같은 경량 모바일 애플리케이션에 이상적입니다.

차내 애플리케이션을 위해 설계된, Nuvo-2510VTC는 광범위 DC 입력을 지원하므로 12VDC 또는 24VDC 차량 배터리로 직접 동력을 공급할 수 있습니다. 이 제품은 선택 가능한 ON/OFF 지연 및 배터리 전압 모니터링을 갖춘 지능형 점화 전원 컨트롤이 특징입니다. Nuvo-2510VTC 는 또한 CAN 2.0A 및 CAN 2.0B를 준수하는 내장된 CAN Bus 포트 1개를 지원합니다. CAN Bus는 개별 ECU 또는 다른 자동차 장치와 통신하는 것과 같은 다양한 종류의 차량 프로토콜의 기반입니다.

Nuvo-2510VTC는 산업용 카메라와 IP 카메라를 위한 2개의 PoE+ 기가비트 이더넷 포트와 1개의 USB3.0 포트를 제공합니다. 게다가, 4개의 시리얼 포트와 3개의 USB2.0 포트를 사용할 수 있습니다. 데이터 전송을 요구하는 모바일 애플리케이션용 Nuvo-2510VTC는 2개의 미니 PCI Express 소켓에 유심을 장착한 2개의 3G/4G 모듈을 설치할 수 있습니다. Nuvo-2510VTC는 다용도 차내 애플리케이션에 이상적입니다

Nuvo-2510VTC is an in-vehicle fanless embedded computer with Intel® Atom™ E3845 quad-core processor.

Equipped with 2 IEEE 802.3at Gigabit Ethernet ports, Nuvo-2510VTC is capable of directly driving 25W GigE and PoE IP cameras with a single standard CAT-5e. Along with intelligent ignition power control and built-in CAN bus, Nuvo-2510VTC is ideal for light-weight mobile applications, such as mobile NVR and mobile APNR.

Designed for in-vehicle applications, Nuvo-2510VTC supports wide-range DC input, and thus can be directly powered by 12VDC or 24VDC vehicle battery. It features intelligent ignition power control with selectable on and off delay and battery voltage monitoring. Nuvo-2510VTC also supports one built-in CAN bus port with compliance to CAN 2.0A and CAN 2.0B. The CAN bus is the foundation of many different kinds of vehicles protocols, such as for communicating with individual ECUs or other automotive devices.

Nuvo-2510VTC provides 2 PoE+ Gigabit Ethernet ports and 1 USB3.0 port for industry cameras and IP cameras. Besides, 4 serial ports and 3 USB2.0 ports are available. For mobile applications which require data transmission, Nuvo-2510VTC is possible to install two 3G/4G modules with USIMs in its 2 mini PCI Express (mPCIe) sockets. Nuvo-2510VTC is ideal for your versatile in-vehicle applications.


System Core
Processor Intel® Atom™ Bay Trail E3845 Quad-core Processor
(1.91 GHz, 2M cache)
Chipset Integrated Intel® HD Graphics
Graphics Integrated Intel® HD Graphics Controller
Memory 1x 204-pin SO-DIMM socket,up to 8GB DDR3L 1333MHz SDRAM
Front Panel I/O Interface
PoE Port 2x IEEE 802.3at (25.5W) Gigabit Ethernet ports by Intel I210
Video Port 1x DB-15 connector for analog RGB,supporting 2560
x 1600 resolution
Serial Port 2x software-programmable RS-232/422/485
(COM1 & COM2)
USB 1x USB 3.0 port and 3x USB 2.0 ports
Power Input 1x 3-pin pluggable terminal block for ignition signal and DC input
Back Panel I/O Interface
Video Port 1x DVI-I connector with DVI-D output, supporting
2560 x 1600 resolution
Audio Port 1x Mic-in, 1x Speaker-out
Series Port 2x RS-232 (COM3 & COM4)
CAN Bus 1x DB-9 connector for CAN bus communications
Storage Interface
SATA HDD 1x Internal SATA port for 2.5” HDD/SSD installation
mSATA 1x internal half-sized mSATA (SATA + USB)
Expansion Bus
Mini PCI-E 1x full-sized mini PCI Express socket with USIM
socket (PCIe + USB) 1x full-sized mini PCI Express socket with external
USIM socket (USB)
Power Supply
DC Input 8~35V DC input
Dimension 205 mm (W) x 146 mm (D) x 44 mm (H)
Weight 1.9 kg (including one 2.5″ HDD and DDR3 SO-DIMM)
Mounting Patented shock-absorbing wall-mounting
(standard) or DIN-Rail mounting (optional)
Operating Temperature -25°C ~ 70°C with SSD, 100% CPU loading */**
-10°C ~ 50°C with HDD, 100% CPU loading */**
StorageTemperature -40°C ~ 85°C
Humidity 10%~90% , non-condensing
Vibration Operating, 5 Grms, 5-500 Hz, 3 Axes(w/ SSD, according to IEC60068-2-64)
Shock Operating, 50 Grms, Half-sine 11 ms Duration (w/
SSD, according to IEC60068-2-27)
EMC CE/FCC Class A, according to EN 55022 & EN 55024

* The 100% CPU loading is applied using Passmark® BurnInTest™ v7.0. For detail testing criteria, please contact Neousys Technology.
**For sub-zero operating temperature, a wide temperature HDD drive or Solid State Disk (SSD) is required../p>